Specifications

Filter Content

LTE Broadband 11n Wireless Router MBR1515

Scheduling

The router uses Network Time Protocol (NTP) to obtain the current time and date from one of

several network time servers on the Internet.

Set Your Time Zone

To localize the time for your log entries, you must

specify your time zone:

1. L

og in to the router as described in Log In to

Your Router on pag

e 11.

2. On the main menu, select Content Fi

ltering >

Schedule:

3. Select your time zone. This setting is used for the

blocking sch

edule according to your local time

zone and for time-stamping log entries.

If your time zone is currently in daylight savings

time

, select the Automatically adjust for

daylight savings time check box.

4. Click Appl

y to save your settings.

Schedule Firewall Services

If you enabled service blocking in the Block Services screen or port forwarding in the Port

Forwarding/Port Triggering screen, you can set up a schedule for when blocking occurs or

when access is not restricted.

1. L

og in to the router as described in Log In to

Your Router on page 11.

2. On the main menu, select Content Fi

ltering > Schedule. The Schedule screen appears.

3. To block Internet services based on a schedule, select Every Day, or select one

or more

days. If you want to limit access completely for the selected days, select All Day. Otherwise,

to limit access during certain times for the selected days, fill in the Start Blocking and End

Blocking fields.

4. Enter the values in 24-hour time format. For example, 10:30 a.m. would be 10 hours and 30

min

utes, and 10:30 p.m. would be 22 hours and 30 minutes. If you set the start time after the

end time, the schedule will be effective through midnight the next day.

5. Click Appl

y to save your changes.