Specifications

Wireless Network Configuration
28
LTE Broadband 11n Wireless Router MBR1515
• 128-bit. Enter 26 hexadecimal digits (any combination of 0–9, a–f, or A–F).
6. Enter th
e encryption keys. You can manually or automatically program the four data
encryption keys. These values must be identical on all computers and access points in your
network:
• Passphras
e. To use a passphrase to generate the keys, enter a passphrase, and
click Generate. This procedure automatically creates the keys. Wireless stations
must use the passphrase or keys to access the router.
Note: Not all wireless adapters support passphrase key generation.
• Key 1
–Key4. These values are not case-sensitive. You can manually enter the four
data encryption keys. These values must be identical on all computers and access
points in your network. Enter 10 hexadecimal digits (any combination of 0
–9, a–f, or
A
–F).
7. Select which of
the four keys is the default.
Data transmissions are alwa
ys encrypted using the default key. The other keys can be
used only to decrypt received data. The four entries are disabled when WPA-PSK or WPA
authentication is selected.
8. Click Apply to save
your settings.
Configure WPA, WPA2, or WPA + WPA2
Both WPA and WPA2 provide strong data security. WPA with TKIP is a software
implementation that can be used on Windows systems with Service Pack 2 or later. WPA2
with AES is a hardware implementation; see your device documentation before implementing
it. Consult the product documentation for your wireless adapter for instructions for configuring
WPA settings.
Note: If you use a wireless computer to configure wireless security
settings, you are disconnected when you click Apply. If you are
disconnected, reconfigure your wireless computer to match the new
settings, or access the router from a wired computer to make further
changes.
 To configure WPA or WPA2 in the router:
1. Log in to the ro
uter as described in Log In to Your Router on page 11.
2. Select W
ireless Settings from the main menu.