Specifications

Wireless Network Configuration
26
LTE Broadband 11n Wireless Router MBR1515
Manually Configure Your Wireless Settings
Note: If you use a wireless computer to change the wireless network name
(SSID) or wireless security, you are disconnected when you click
Apply. To avoid this occurrence, connect your computer directly to
the router with an Ethernet cable when you make these changes.
 To view or manually configure the wireless settings:
1. Log in to the router as describe
d in Log In to Your Router on page 11.
2. Select Wi
reless Settings from the main
menu.
The settings for this screen are explained
in the following table.
3. Fo
r initial configuration and test, leave the
ot
her settings unchanged.
4. To save your changes, click App
ly.
5. Configure and test your computers for
wireless connectivity
.
Set up your wireless computers with the
same SSID and wireless secu
rity settings
as those on your router. Check that they
have a wireless link and are able to obtain an IP address by DHCP from the router. If
there is interference, adjust the channel.
Settings Description
Wireless
Netwo
rk
Name (SSID) The SSID is also known as the wireless network name. Enter a
32-character (maximum) name in this field. This field is
case-sensitive.
When there is more than one wireless network, SSIDs provide a
means for
se
parating the traffic. To join a network, a wireless
computer or device must use the SSID.
Region The location where the router is u
sed (United States).
Channel The wireless channel that is used by the gateway
. The default is
Auto.
Do not change the channel unless you experience interference
(indicated
by lost connections or slow data transfers). If this
interference happens, you might need to try different channels to see
which works best.
Mode The default is Up to 145 Mbps.