Specifications

Advanced Settings

LTE Broadband 11n Wireless Router MBR1515

• Your company’s network address is 134.177.0.0.

When you first configured your router, two implicit static routes were created. A default route

was created with your ISP as the g

ateway, and a second static route was created to your

local network for all 192.168.1.x addresses. With this configuration, if you attempt to access a

device on the 134.177.0.0 network, your router forwards your request to the ISP. The ISP

forwards your request to the company where you are employed, and the request is likely to

get denied by the company’s firewall.

In this case you have to define a static route, telling your router that 134.177.0.0 should be

accessed t

hrough

the ISDN router at 192.168.1.100. In this example:

• The Destina

tion

IP Address and IP Subnet Mask fields specify that this static route

applies to all 134.177.x.x addresses.

• The Gateway IP Address fi

eld specifies that all traffic for these addresses should be

forwarded to the ISDN router at 192.168.1.100.

• A metric value of 1 works since the ISDN router is on the LAN.

• Private is selected on

ly as a precautionary security measure in case RIP is activated.

 To set up a static route:

1. Select ADVA

NCED > Advanced > Static Routes to display the following screen: