Specifications

Administration
56
LTE Broadband 11n Wireless Router MBR1515
You can either use the Restore Factory Settings button on the back of the router (see Factory
Default Settings on p
age 93), or you can click the Erase button in this screen.
Erase sets the user name to admin, the password to p
assword, and the LAN IP address to
192.168.1.1, and enables the router’s DHCP.
Set Password
This feature allows you to change the default password that is used to log in to the router with
the user name admin.
This change of password is not the same as changing the password for wireless access. The
lab
el on
the bottom of your router shows your unique wireless network name (SSID) and
password for wireless access (see Router Label on p
age 10).
 To set the password for the user name admin:
1. Select ADVA
NCED > Administration > Set Password to display the following screen:
2. Type the old password, and type the new password twice in the fields on this screen.
3. If you want to be able to recover the password, select the Ena
ble Password Recovery
check box.
4. Click Apply so that
your changes take effect.
Password Recovery
NETGEAR recommends that you enable password recovery when you change the password
for the router’s user name of admin. Then you have an easy way to recover the password
when it is forgotten. This recovery process is supported in Internet Explorer, Firefox, and
Chrome browsers, but not in the Safari browser.