Specifications

Administration
51
LTE Broadband 11n Wireless Router MBR1515
- Domain Name Server. The Domain Name Server addresses used by the router.
A Domain Name Server translates human-language URLs such as
www.netgear.com into IP addresses.
• Mobile
Broadband Modem. This section shows the properties of the mobile
broadband modem.
- Modem Identity. Shows th
e modem in use.
- Mo
dem SW version. The software version of the modem.
- Mo
dem driver version. The driver version of the modem.
- IMEI.
International Mobile Equipment Identity. The unique identity of the modem.
- Op
erator. The ISP for the broadband wireless network.
- Netwo
rk mode. The mode of the current network the modem is connected to.
This mode is dependent on coverage and distance from the cell site.
• W
ireless Broadband Port. The current settings of mobile broadband port.
- Connecti
on Status. This setting shows the status of the wireless broadband
connection.
- IP Address.
The IP address used by the Internet (WAN) port of the router. If no
address is shown or the address is 0.0.0, the router cannot connect to the
Internet.
- Protocol. T
his shows if the router is using a fixed IP address on the WAN. If the
value is DHCP Client, the router obtains an IP address dynamically from the ISP.
- IP Subnet Mask. The IP subne
t mask used by the Internet (WAN) port of the
router.
- Domain Name Server. The
Domain Name Server addresses used by the router.
A Domain Name Server translates human-language URLs such as
www.netgear.com into IP addresses.
• LA
N Port. These values are the current settings, as set in the LAN Setup screen.
- MAC Address.
The Media Access Control address. This address is the unique
physical address used by the Ethernet (LAN) port of the router.
- IP Address.
The IP address used by the Ethernet (LAN) port of the router. The
default is 192.168.0.1.
- DHC
P. Identifies whether the router’s built-in DHCP server is active for the
LAN-attached devices.
- IP Subnet
Mask. The subnet mask associated with the LAN IP address.
• W
ireless Port. These values are the current settings, as set in the Wireless Settings
screen.
- Name (SSID). Th
e SSID of the router.
- Region.
The location (country).
- Channel. The current
channel in use.
- W
ireless AP. Indicates if the access point feature of the router is enabled or not.
If not enabled, the WiFi LED on the front panel is off.
- Bro
adcast Name. Indicates if the router is broadcasting its SSID.