Specifications

NETGEAR genie ADVANCED Home
31
LTE Broadband 11n Wireless Router MBR1515
 To configure your mobile broadband account access:
1. Select ADVANCED > Setup > Mobile Broadband Settings to view the following
screen:
The following settings are provided:
• User Name. The
account login user name.
• Password. The accou
nt password for authentication.
• Country. Th
e country where mobile broadband service is provided.
• Internet Service Provider. The
Internet service provider of the 4G network.
• PIN code. The PIN code of the SIM card if the PIN has been enabled.
• Access Number. The p
hone number of the remote site.
• APN. The access point name.
• PDP Type. The type of packet data protocol.
• Connect automatically at startup. When this check box is selected, the modem
a
utomatically connects to the network when powered up. This check box should be
selected after login information is provided.
• Reconnect automatically when connection is lost. When t
his check box is
selected, the modem attempts to reconnect to the network when the connection is
lost. Under normal situations, this setting should be selected.
• Roa
ming automatically. When this ch
eck box is checked, the unit might roam to any
available operator in range and might incur roaming charges.
• Wireless Button Configuration. Choo
se whether you want the WPS button to
control WiFi only or both WiFi and wireless broadband.
• Connection Status. Th
e status of the current WAN port.
2. Click Appl
y to save your settings.
3. Click Connect when you want
to connect manually to the network.