Operation Manual

88
verizon.com/fi os | ©2016 Verizon. All Rights Reserved.
05/ USING NETWORK
CONNECTIONS
– Automatic by DHCP - sets the MTU according to the
DHCP connection
– Manual - allows you to manually set the MTU
COAX LINK
1. To set the Channel, select the coax link channel as 1 to 3.
2. Select the On or Off radio button in the Auto Detection fi eld.
3. To set privacy, select the Enabled check box. This causes
all devices connected to the coaxial cable to use the same
password. This is recommended.
4. To set the password, enter the Coax Link password in the
Password fi eld.
5. To enable or disable the Coax link, click Disable or Enable.
6. To view the devices connected using the coaxial cable, click
the Go to WAN Coax Stats link.