Operation Manual

WIRELESS ACCESS POINT CONNECTION AND
BROADBAND ETHERNET/COAX CONNECTION
– Manual - allows you to manually set the MTU
3. Click Apply to save changes.
5.4/ BROADBAND ETHERNET/COAX CONNECTION
A Broadband Ethernet connection connects computers to your
Gateway using Ethernet cables. The connections are either direct or
use network hubs and switches.
A Coax connection connects devices, such as set-top boxes, to your
Gateway using a coaxial cable.
Note: If disabling the connection, you must reboot your Gateway for the
change to take effect.
To view the connection:
1. In the Network Connections page, click the Broadband
Connection (Ethernet/Coax) link.