Operation Manual

NETWORK (HOME/OFFICE)

CONNECTION

Once enabled and conﬁ gured, the DHCP server automatically assigns

IP addresses to any network devices which are set to obtain their IP

address dynamically.

If DHCP Server is enabled on your Gateway, conﬁ gure the network

devices as DHCP Clients. There are 2 basic options in this section:

Disabled and DHCP Server.

To set up the Gateway’s network bridge to function as a DHCP server:

1. In the IP Address Distribution section, select the DHCP

server. Once enabled, the DHCP server provides automatic

IP assignments (also referred to as IP leases) based on the

preset IP range deﬁ ned below.

• Start IP Address – Enter the ﬁ rst IP address in the IP

range that the Gateway will automatically begin assigning

IP addresses from. Since your Gateway’s IP address is

192.168.1.1, the default Start IP Address is 192.168.1.2.