Operation Manual

02/ CONNECTING

YOUR GATEWAY

Select your Gateway’s wireless network name (SSID) from

the device’s list of discovered wireless networks.

4. When prompted, enter your Gateway’s wireless password

(WPA2 key) into the device’s wireless settings. Your

Gateway’s default wireless network name and wireless

password are located are on the sticker on the side of your

Gateway.

5. Verify the changes were implemented by using the device’s

web browser to access a site on the Internet.

6. Repeat these steps for every device that you are wirelessly

connecting to your Gateway.

COAXIAL

1. Verify all coax devices are turned off.

2. Disconnect any adapter currently connected to the coaxial

wall jack in the room where your Gateway is located.

3. Connect one end of the coaxial cable to the coaxial wall jack

and the other end to the Coax port on your network device.

4. Power up the network device.

2.2/ MAIN SCREEN

When you log into your Gateway, the page displays showing the Main

navigation menu at the top of the page and your Gateway’s Status,

including Quick Links, My Network, and Verizon Zone display in the

body of the page.