Operation Manual

STATIC NAT AND
SECURITY LOG
3. Select a source address in the Specify Address fi eld or enter
an IP address in the text box.
4. Enter the public IP address.
5. If using port forwarding, select the Enable Port Forwarding
for Static NAT check box.
6. Click Apply to save changes.
7. Repeat these steps to add additional static IP addresses.
6.7/ SECURITY LOG
You can view events that your fi rewall has blocked by accessing
the security log. Your Gateway reports events, such as attempts to
establish inbound and outbound connections, attempts to authenticate
at an administrative interface, such as your Gateway GUI, fi rewall
confi guration, and system start-up.