Operation Manual

ACCESS CONTROL AND
PORT FORWARDING
3. To apply the rule to:
• All networked devices - select Any.
• Specifi c devices only - select User Defi ned, then click Add
and create a network object.
4. In the Protocol fi eld, select the Internet protocol to be
allowed or blocked.
If the service is not included in the list, select User Defi ned.
The Edit Service page displays. Defi ne the service, then click
OK. The service is automatically added to the Add Access
Control Rule section.
5. Specify when the rule is active as Always or User Defi ned
and click Add to create the schedule.
6. Click Apply to save changes. The Access Control page
displays a summary of the new access control rule.
6.1b/ DISABLE ACCESS CONTROL
You can disable an access control and enable access to the service
without removing the service from the Access Control table. This can
make the service available temporarily and allow you to easily reinstate
the restriction later.
• To disable an access control, clear the check box next to the service
name.
• To reinstate the restriction, select the check box next to the service
name.