User guide

Key Fob Pairing

The key fob setup process has two main steps, conﬁguring your Vehicle Diagnostics Module for

your vehicle and pairing your Vehicle Diagnostics Module with your vehicle. You can perform the

conﬁguration step at any time from either the smartphone app or the website. To complete the

pairing step you will need to be in your vehicle. It is necessary to perform this step in your

vehicle because you may be prompted at times to turn your ignition key and press speciﬁc

vehicle buttons. Following the successful set up of your Vehicle Diagnostics Key Fob, you will be

able to use the smartphone app to send key fob commands to your vehicle in the same man-

ner as you would with your original key fob. In addition, you can use the Delphi Connected Car

website to send key fob commands as well.

Note: While the Vehicle Diagnostics Module currently supports most remote start systems that

came from the manufacturer, you can check if your remote start feature is supported. Refer

to the ﬁtment guide at connectedcar.delphi.com/ﬁtment. For vehicles that require a sequence

of buttons to be pressed to perform a remote start, you only need to press the Remote Start

button once. The Vehicle Diagnostics Module will automatically provide any button sequence

required to start the vehicle.

Note: You will only need to pair the key fob using the Delphi Connected Car app or website one

time. After the initial pairing, the key fob capability will be available from either location.

Note: The key fob setup should be only performed when all key fobs are present. If you do this

with only one present it may de-program your secondary key fobs.

Before attempting the key fob setup process, look on your dashboard view to see if your ve-

hicle’s VIN has been identiﬁed. If the Vehicle Diagnostics Module was able to read your vehicle’s

VIN, you will see it displayed at the top of the screen below your vehicle name. If the Vehicle

Diagnostics Module was unable to read your vehicle’s VIN, your vehicle will be identiﬁed by

the word Vehicle followed by a number. If your VIN is not available, see section Key Fob Setup

without VIN. You can also edit your vehicle information and provide either the VIN or the Make,

Model, and Model Year of your vehicle prior to fob setup. See section Edit Your Vehicle Informa-

tion.