User guide

30
Note: If needed, you can access the OBD Locator from the website or the smartphone app. On the website,
click on your username in the upper right-hand corner. From the drop-down menu, click the button labeled
OBD LOCATOR.
Install Your Vehicle Diagnostics Module
1. Check that you have a strong signal where your vehicle is parked. Visit Verizon’s interactive
coverage map: verizonwireless.com/maps.
2. Make sure your vehicle is parked outside in a safe location and the engine is turned off.
3. Now plug the Vehicle Diagnostics Module into the OBD II port (or into the extension cable if it
is required). Make sure that the Vehicle Diagnostics Module is fully seated.
5. You will see a picture of the location of your OBD-II connector.