User guide

030-300239 Rev. A 95 March 2008
Verizon FiOS Router
(
Model 9100VM
)
User Guide
13.2.4 WAN PPPoE Properties—Configuring WAN Ethernet
To configure the Router so that it connects to another DSL device via Ethernet, for example connecting to another
VDSL2 device that provides WAN access, you will need to change the WAN interface settings in your Router. To
do this, in the following Network Connections screen, click the WAN PPPoE link.
NOTE: When the Router is configured for this setting, the Router’s transceiver will be disabled. And the WAN
Ethernet port on the rear of the Router will be used to connect to another VDSL2 device.
13.2.4.1 WAN PPPoE Properties—General
If you clicked WAN PPPoE, the following screen will appear. Next, select Settings in the left submenu.