User guide

030-300239 Rev. A 21 March 2008
Verizon FiOS Router
(
Model 9100VM
)
User Guide
8. CONFIGURING YOUR BROADBAND CONNECTION
To browse the Internet using your Router, you must confirm your VDSL2 connection and establish an Internet
connection with Verizon. The procedures for configuring your Router’s connection settings are explained in this
section.
8.1 Confirming Your VDSL2 Connection
IMPORTANT: You must have active VDSL2 service before the Router can synchronize with Verizon’s equipment.
To determine if the Router has established a VDSL2 link, at the Router’s front panel, check to see if the Router’s
BROADBAND LED is solid green. Solid green indicates that a VDSL2 connection is established. (The
BROADBAND LED may flash while the connection is being established. Please wait a brief moment for the Router
to connect.
After confirming your VDSL2 connection, proceed to section 8.2 to configure your Router’s Internet connection
settings.
8.2 Connecting to the Internet
After you have logged on to the Router, the following home page will appear. Use this page to determine the
Router’s Internet connection status. If you do not have an Internet connection, the Internet Address field will
display “Not Available.”