User guide

030-300554 Rev. A 125 June 2008
Verizon FiOS Router
(
Model 9100EM
)
User Guide
As in the example below, you will need to specify your external IP address that you used for your NAT/NAPT rule
and also specify the local host (IP or name). Also make sure that you use the same protocol as your NAT/NAPT
rule. For our web server example this information is shown filled in below.
NOTE: When setting up your Port Forwarding setting please ensure that you enter in the same external IP address
information as well as match what protocols were defined in the NAT/NAPT rule you just created.
Clicking OK
will take you back to the main port forwarding page and it will show your newly created rule.
Refer to the Port Forwarding Section for more information on other options for port forwards.
Your NAT/NAPT rule has now been created and your machine should be accessible via the IP address you specified
in your rule.