User guide

030-300554 Rev. A 121 June 2008
Verizon FiOS Router
(
Model 9100EM
)
User Guide
Select the Network Object Type from drop-down list, select the desired object type. A single IP address, an entire
subnet, a range of addresses or a specific DHCP Vendor option. (These are generic “Network” objects that are
defined in the Network Objects section.)
For example, if you select IP Address as the network object type you must specify a single WAN IP address to add
to the pool. Enter a valid WAN IP address then click OK to continue.
If you have entered an IP Address and clicked OK in the Add Item screen, you are directed back to the main screen
and your network address is shown in the pool. You now must create the NAT/NAPT Rule Set for this new external
IP Address. To create rule, under NAT/NAPT Rule Sets, click the New Entry link.