User guide

Setting Up Your Router
7
Verizon 4G LTE Broadband Router
The following table describes each LED and button on the front panel of the router.
Table 1. LED descriptions
LED Activity Description
WPS
Wi-Fi Protected Setup (WPS) lets you connect to a secure Wi-Fi network without typing its
password. Press the Wi-Fi Protected Setup (WPS) button on the router and, within two
minutes, connect other Wi-Fi devices with WPS capability. For more information about this
function, see Join Your Wireless Network on page 30.
Wi-Fi
Press this button to turn off the Wi-Fi connection. Wi-Fi and 4G LTE are turned on by default
settings.
Power
Solid green The router is turned on and operating normally.
Solid amber POST (power-on self-test) is in progress.
Off Router power is off.
Internet Port
Solid green An Internet connection is established.
Solid amber Traffic meter limit has been reached, and traffic is blocked. Users can
set this feature.
Blinking green Data is being transmitted over the Internet connection.
Blinking amber Traffic meter limit has been reached, but traffic is not blocked. Users
can set this feature.
Blinking green and
amber
Failover from wide area network (WAN) to mobile broadband occurred.
Off No Internet connection is detected.
Wi-Fi
Blinking blue Data is being transferred over the Wi-Fi link.
Off The wireless Internet is turned off.
LAN Ports
Solid green The local area network (LAN) Ethernet ports have detected wired links
with computers or other Ethernet devices.
Blinking Data is being transmitted.
Off No link is detected on these ports.
WAN Port
Solid green The wide area network (WAN) Ethernet port has detected an active link.
Blinking Data is being transmitted or received.
Off No link is detected on this port.
4G LTE
Solid blue 4G LTE or 3G coverage is established for the router.
Off No 4G LTE or 3G coverage is detected.