User guide

Advanced Router Settings
67
Verizon 4G LTE Broadband Router
5. Configure the settings described in the following table.
Settings Description
Service Name A descriptive service name.
Service User Select Any to allow any computer on the Internet to use this service.
Select Single address and enter the IP address of one computer to only
allow a trusted computer
.
Service Type Select TCP
/UDP.
Triggering Port Enter the outbound traffic port’s number that opens the inbound ports.
Connection Type Select:
• TCP
• UDP
• TCP/UDP (both)
If you are not sure, select TCP/UDP.
Starting Port The incoming starting port number of the range of ports that are opened when
triggered.
Ending Port The incoming ending port number of the range of ports that are opened when
triggered.
6. Click Apply.
The added service appears in the list.
Note: Only one computer at a time can use the triggered application.
Miscellaneous WAN Settings
The Miscellaneous screen lets you:
• Configure a DMZ (demilitarized zone) server.
• Change the maximum transmit unit (MTU) size.
• Enable the router to respond to a pink on the Wide
Area Network (WAN) Internet port.
T
o change broadband Internet connection settings, use the Broadband Settings screen, as
described in Configure Your Internet Settings on page 15.