User guide

Setting Up Your Router
17
Verizon 4G LTE Broadband Router
3. Adjust the settings as needed.
The fields in this screen are described in the following table:
Settings Description
Connection Status Indicates the state of the Internet connection, for example, Disconnected,
Negotiating, Detecting Modem, Connecting, or Connected.
Network Mode Select one of the following:
• Automatic (4G L
TE, CDMA). This is the default Internet connection mode, in
which the router can fall back automatically from 4G L
TE service to CDMA,
EVDO, or 1xRTT service, depending on the environment.
• 4G L
TE only. The router functions in 4G L
TE mode only and does not fall
back to another type of service if 4G LTE service is not available.
• CDMA Auto
(EVDO, 1xRTT)
. The router functions in Code Division Multiple
Access (CDMA) mode, which is a 3G service mode, and can switch
automatically from CDMA to EVDO or 1xRTT service, depending on the
environment.
• EVDO only. The router functions
in Evolution-Data Optimized (EVDO) mode
only, which is a 3G service mode.
• 1xRTT only. The
router functions
in 1 times Radio Transmission Technology
(1xRTT) mode only, which is a 3G service mode.
Connect automatically
at startup
If selected, the router automatically connects to the network. This should be
selected after sign-in information is provided.
Reconnect
automatically when
connection is lost
If selected, the router attempts to reconnect to the network if the connection is lost.
This option is normally selected.
Wi-Fi Button
Configuration
The Wi-Fi button will:
• Control W
i-Fi Only. Pressing the Wi-Fi button toggles the Wi-Fi function on
and off. If the Wi-Fi function is enabled, the 4G LTE broadband function is
unaffected.
• Control Both W
i-Fi and 4G LTE Broadband. Pressing the Wi-Fi button
toggles both the Wi-Fi function and 4G L
TE broadband on and off, at the
same time. Depending on the coverage, 4G LTE broadband coverage might
or might not be connected successfully.
• Control 4G LTE Only. Pressing the Wi-Fi button toggles the 4G LTE function
on and of
f, if the function is enabled. The Wi-Fi function is unaffected.
4. Select one of the following:
• Connect: Manually connect to the network.
• Disconnect: Disconnect from the current network.
• Refresh: Update the connection status.
• Cancel: Discard changes.
• Apply:
Apply the changes that you made.