User guide
58
LAN
The LAN page gives you settings and information about the Jetpack's network. The LAN menu
contains the following sections:
• IPv4
• IP address — The IP address for the Jetpack.
• Subnet mask — The subnet mask network setting for the Jetpack. The default value
255.255.255.0 is standard for small (class "C") networks. If you change the LAN IP Address,
ensure you use the correct Subnet Mask for the IP address range containing the LAN IP
address.
• MAC address — The Media Access Controller (MAC) or physical address for the Jetpack.
• Enable DHCP server — The Enable DHCP Server checkbox enables or disables the DHCP
Server feature.
• Start DHCP address range at — The start range of IP addresses reserved for use by the
Jetpack's DHCP server table.
• DHCP address range — The current range of IP addresses reserved for use by MiFi5510L
Jetpack's DHCP server table. If a device with a static IP address wants to connect to
MiFi5510L Jetpack's network, the static IP should be outside of the DHCP address range.
Most devices do not have a static IP.
• IPv6
• Enable IPv6 — The Enable IPv6 checkbox enables or disables the IPv6 feature.
• Link-Local address — Displays the local address when IPv6 is enabled.