Manualshelf

User guide

ManualsBrandsVerizon ManualsComputer equipment4G LTE
41424344454647484950
40
Find the MAC Address on a Computer
The Media Access Controller (MAC) Address is also known as a hardware or physical address for a
device (usually a network adapter). It consists of six pairs of numbers and letters (for example,
00-21-9B-1C-64-34).
You can view the MAC address for any device connected to the MiFi wireless network from the Wi-Fi
screen. See Wi-Fi on page 27.
Tip! You can cut and paste your computer’s MAC address from the Wi-Fi Clients section of the Wi-Fi
screen.
If the computer is not connected to the MiFi wireless network, you can nd the MAC address
directly. To nd the MAC address, follow one of these steps.
• On a Windows PC, the MAC address is the Physical Address. You can nd the Physical Address
by running ipcong /all from the cmd window.
» To run ipcong/all, select Start > All Programs (or Programs) > Accessories > Command Prompt to open
the Command Prompt window. Then type ipcong/all and press the Return or Enter key.
• On a Mac, the MAC address is the AirPort ID.
» To find the AirPort ID, open the Apple () Menu > System Preferences > Network. In the list, click
AirPort. Click Advanced. A sheet opens. Click the AirPort tab. The AirPort ID is at the bottom of the sheet.
IMPORTANT Windows only: Make sure you get the MAC address for the wireless network
adapter and not the Ethernet controller (NIC), if the computer has both.
Trusted Client List
The Trusted Client List section displays the MAC address(es) of trusted devices. Only devices in the
Trusted Client List are able to connect to the MiFi4510L wireless network.
Add Trusted Client MAC Address
To add a device to the Trusted Client List, follow these steps.
➊ Type the Wi-Fi-enabled device’s MAC address in the Add Trusted Client MAC Address eld. You can
use either “:” or “-” as the separator (for example, 00:21:9B:1C:64:34 or 00-21-9B-1C-64-34).
Tip! You can cut and paste your computer’s MAC address from the Wi-Fi Clients section of the Wi-Fi
screen.
➋ Click Add Client.
➌ Repeat steps 1 and 2 as needed.
➍ When the list is complete, click Apply.