User guide

Westell, Inc. Quick Start Guide 6
030-300391 Rev. A May 2004
Connect a microfilter to telephone
equipment and DSL equipment
that share the same wall jack:
1. Plug the short cord that is
attached to the DSL filter into
the phone jack on the wall plate.
2. Plug the standard telephone
cable from the telephone device
into the jack of the DSL filter
where it is labeled “PHONE.”
3. Plug one end of the DSL phone
cable (that you received in the
microfilter kit) into the DSL
filter where it is labeled “HPN.”
4. Plug the other end of the DSL
phone cable into the DSL Line
jack located on the rear panel of
the Router.