User guide

Westell, Inc. Quick Start Guide 5
030-300391 Rev. A May 2004
INSTALLING THE MICROFILTERS
If your DSL service shares the same line as your fax machine or
telephone, you need to install a filter. Please follow the installation
procedure in this section, and be sure to install one filter on every
phone line that has a telephone, answering machine, or fax
machine.
Connect a DSL filter to standard
telephone equipment:
1. Plug the short cord that is
attached to the DSL filter into
the phone jack on the wall plate.
2. Plug the standard telephone
cable from the telephone device
into the jack of the DSL filter
where it is labeled “PHONE.”
Note: Repeat these steps for each telephone. However, DO NOT place a microfilter on
the DSL cord that is used to connect the Router to the wall jack.
1