User guide

030-300505 Rev. A 99 April 2007
User GuideVersaLink Wireless Gatewa
y
(
Model 327W
)
14.3.3.3.2 Creating a Service Based on Specific Port Triggering Ports
The Trigger Ports feature allows you to forward a range of ports to an IP address on the LAN only after specific
outbound traffic. You can set up a port triggering entry based on your specific ports.
IMPORTANT: Using various Internet applications depends on the Router’s firewall settings. Make sure that the
Router’s firewall is set to Medium Security or lower to take advantage of all the port forwarding features. Firewall
settings take precedence over port forwarding services configured in the Router. For example, if the firewall is set to
Medium Security, this will block ICMP packets even if the ICMP service is enabled. If a port forwarding service is
not working, try setting the firewall to a lower setting.
To create a port forwarding service based on specific port triggering ports, at the Create Port Forwarding Service
screen, do the following:
1. Click the Port Triggering option button. (By factory default, the Port Forwarding option button will be
selected.)