User guide

030-300505 Rev. A 77 April 2007
User GuideVersaLink Wireless Gatewa
y
(
Model 327W
)
13.2.3.3.1 Configuring the WAN Uplink Protocol Settings for PPPoE
NOTE: The instructions in this section refer to the Router configured for WAN Uplink mode. Be sure that you have
selected WAN Uplink port from the drop-down menu in the VersaPort screen.
To set the Uplink protocol to PPPoE, from the Protocol drop-down menu, select PPPoE.
NOTE: PPPoE is the factory default setting for WAN Uplink port.
If you selected PPPoE, the following screen will be displayed. Next, click the expand button
to expand the page.