User guide

030-300505 Rev. A 73 April 2007
User GuideVersaLink Wireless Gatewa
y
(
Model 327W
)
13.2.3.1 Enabling LAN Ethernet Port—Disabling WAN Uplink Port
If you selected LAN Ethernet port in the VersaPort screen, this will enable the Router’s DSL transceiver, and the
Router will use its DSL port as the WAN interface. This configuration will disable the WAN Uplink port
(UPLINK/E1 on the rear of the Router).
• When LAN Ethernet port is selected, the DSL port on the rear of the Router is enabled and is the WAN
interface to the Internet.
• When WAN Uplink port is selected, the UPLINK/E1 port on the rear of the Router is enabled and is the
WAN uplink to another ADSL device through which you will make your Internet connection.
Remember, you must click Apply to allow the settings to take effect in the Router.
NOTE:
1. When using the optional UPLINK/E1 port, Ethernet LAN connection is limited to E2, E3, and E4.
The WAN Uplink feature is optional and, if it is disabled, the Router will use DSL only as the WAN interface.
2. Some menu options are unavailable when the Router is configured for WAN Uplink port. However, all of the
Router’s menu options are displayed when the Router is configured for LAN Ethernet port. 3. The Router’s
factory default setting is LAN Ethernet port.
4. If WAN Uplink is not enabled in the .ini file, the Router will use DSL only as the WAN interface.