User guide

030-300505 Rev. A 68 April 2007
User GuideVersaLink Wireless Gatewa
y
(
Model 327W
)
If you clicked Apply in the preceding screen, the following pop-up screen will appear. The Router must be reset to
allow the new configuration to take effect. Click OK to continue.
If you clicked OK, the following screen will appear. After a brief delay, the home page will be displayed.
13.2.2.3.2 Bridge Protocol—Routed Bridge Mode
If you select Bridge as the Protocol, and then select Routed Bridge from the Bridge Mode drop-down menu, the
following screen will appear. Enter the desired values in the fields provided, and then click Apply.
VC 1 – Bridge Protocol (Routed Bridge Mode)
DHCP Client Allows you to either Enable or Disable the DHCP Client.
Select (enable DHCP Client) to obtain IP address automatically.
Select (disable DHCP Client) to use the static IP address that you enter into fields provided.
IP Address The IP network address that your Router is on.
Subnet Mask The subnet mask, which determines if an IP address belongs to your local network.
Gateway The Router’s IP gateway address.
DNS Primary This value is provided by Verizon.
DNS Secondary This value is provided by Verizon.