User guide

030-300505 Rev. A 38 April 2007
User GuideVersaLink Wireless Gatewa
y
(
Model 327W
)
Basic Security Settings
Wireless Operation Factory Default = On
Choose the desired setting.
When On is selected, wireless stations (wireless computers or other wireless devices) can
connect to the Router, as long as the appropriate settings are configured in the wireless
station’s network adapter.
When Off is selected, computers will not be able to connect to the Router wirelessly.
Network Name (SSID) Factory Default = 06B410749516
This string, (30 characters or less) is the name of your wireless network. To connect to the
Router, the SSID on a computer’s wireless card must match the SSID on the Router. You
can change the SSID to any name or code you want.
Channel Factory Default = 6
This is the channel of the frequency band at which the Router communicates.
The Router transmits and receives data on this channel. The number of channels to choose
from is pre-programmed into the Router. A computer’s wireless card does not have to be
set to the same channel as the Router; the wireless cards scan all channels, and look for a
Router to connect to. Note: In the United States, use channels 1 through 11.
WEP configured Factory Default = On