User guide

030-300505 Rev. A 146 April 2007
User GuideVersaLink Wireless Gatewa
y
(
Model 327W
)
VLAN Configuration
VLAN Enable Factory Default = Disabled
If this box is checked, VLAN will be Enabled (activated). This will allow
VLAN tagging to occur according to the data port’s configuration.
LAN Port This allows you to select the LAN port that you wish to configure.
Possible Responses:
Ethernet Port 1
Ethernet Port 2
Ethernet Port 3
Ethernet Port 4
USB Port
WLAN Port
VLAN ID This allows you to assign a VLAN ID to the port.
Possible Responses:
1 through 8
VLAN Priority This allows you to set the VLAN priority for the port.
Possible Responses:
0 through 7
Outgoing VLAN Tag This allows you to keep or remove the VLAN tag on the port when data is
outgoing.
If you clicked Apply in the preceding screen, the following pop-up screen will appear. The Router must be reset to
allow the new configuration to take effect. Click OK to continue.
If you clicked OK, the following screen will appear. After a brief delay, the home page will be displayed. Confirm
that you have a DSL link and that your PPP Status displays UP.