User guide

V740 ExpressCard USER GUIDE
7
Installation and Configuration
This section guides you through the hardware installation and setup process for the V740 ExpressCard. Before you
begin using your ExpressCard with VZAccess Manager, read through this Hardware Manual to become familiar with
the hardware and the additional documentation that came with your V740 ExpressCard.
Basics
Follow these steps to begin using your V740 ExpressCard:
1. Turn on your computing device and close all applications.
2. Insert the VZAccess Manager CD-ROM into your computer’s CD drive.
3. If the VZAccess Manager CD does not automatically launch, manually launch the VZAccess Manager CD
following the guidelines outlined for manual CD launch per the operating system of your computing device.
Instructions for manual CD launch may be found in the User Guide or Help features of your computing
device.
4. Install VZAccess Manager as outlined in the Quick Reference Guide.
5. Insert the V740 ExpressCard to install the necessary drivers.
6. Launch VZAccess Manager, and click on the Connect button. If your device was activated prior to
installation of VZAccess Manager and you are in a BroadbandAccess/NationalAccess coverage area, you
will be connected to the Verizon Wireless network. If your device was not activated prior to installation of
VZAccess Manager, the software will connect to the Verizon Wireless activation website. Follow the on-
screen instructions to complete the activation. Refer to the VZAccess Manager User Guide, located on the
Installation CD for more detailed instructions.
Important: Installation must be performed within a BroadbandAccess- Rev. A/O and/or NationalAccess
coverage area.
Important: Before installing your new software, delete or uninstall any previously existing modem or dialer
software from your computing system.
Important: VZAccess Manager must be installed before you insert the V740 ExpressCard into your computer for
the first time. Only after the software has been installed can the operating system successfully install and
configure the V740 ExpressCard.