User guide

BEFORE USING
BATTERY USAGE
12
BATTERY USAGE
BEFORE USING
13
H BATTERY INSTALLATION
As shown in the picture below, place the metal
locators of the battery into the holes located in
the bottom of the unit.

Place the battery on the back of the handset
and slide into place.

Push the battery down until it locks into
place.
H BATTERY REMOVAL

Pull up the release latch, lift up the battery.

Remove the battery from the handset.
If the battery is not correctly placed in the
compartment, the handset will not turn on
and/or the battery may detach during use.
H BATTERY CHARGING
POWER CONNECTION

Plug the Travel Charger into a standard
outlet.

Plug the other end of the
Travel Charger into the
bottom of your phone.
The battery must be
installed onto the phone.
When you charge the battery with the
phone power off, you will see a charging
status screen. You cannot operate the
phone until it is powered on.
The battery is not charged at the time of
purchase.
Fully charge the battery before use.
It is more efficient to charge the battery
with the handset powered off.
The battery must be installed in the
phone in order to charge it.
Battery operating time gradually
decreases over time.
If the battery fails to perform normally,
you may need to replace the battery.
070427_PN-310_EN_M_REV01.indd 12-13070427_PN-310_EN_M_REV01.indd 12-13 2007.5.7 11:12:16 AM2007.5.7 11:12:16 AM