Installation Guide

What's in the box
• EAT Device with attached 15’ harness
• 4 x self-drilling screws for metal: standard 5/16” hex head, number 12 size, 1 inch long
• 4 x bolts: Serrated-flange 5/16” hex head, 10-32 thread, 1 ¼ inch long, .19 inch screw width
• 4 x locknuts 3/8” head
• 4 x washers, flat type
Depending on where the device is to be mounted, you will use either the screws or the bolts with lock nuts
and washers. If using the screws, pre-drilling the holes is recommended.