Installation Guide

I C O N
N A M E
S T A T U S
Bluetooth
At this time, the device does not support any Bluetooth features. This status LED can be disregarded until
further notice.
What to bring
• Cordless drill with metric and standard bits. For mounting hardware sizes, see What's in the box.
• Safety glasses or other eye protection
• Marker for marking where holes will be drilled
• If drilling a pass-through hole, a grommet and silicone to seal the grommet. (Use a polyurethane
based silicone instead of those with acid based curing agents to avoid corroding metal surfaces).
• 2mm hex head driver or allen key (to remove device back cover if battery pack needs to be
connected)
• Ring terminals
• Butt connectors
• Protective wire loom
• Dielectric grease
• Super 33 or better electrical tape
• 16-18 gauge wire to extend connections, if needed
• Wire ties
• The Reveal Hardware Installer App