Specifications

CopyDisc Duplicator Series
50
Remove the Puma from its packaging. You will notice that the base of the printer has
location holes, which directly mirror the location pins situated on the printer plate.
Carefully position the printer onto the printer plate (see Figure E2) ensuring that the location pins fit
snugly into the location holes on the base of printer itself.
Power On
Connect the parallel cable and the serial control cable to the printer (Figure E3). Now connect the
respective power cables to the printer and the CopyDisc and connect to the mains.
Press the power on button on the front, right of the printer first followed by the power on button at
the back of your CopyDisc. When turning power off, switch off the printer first followed by the
CopyDisc.
Serial Control Cable
Power Cables
Parallel Cable
Fig E3