Specifications

CopyDisc Duplicator Series
8
SECTION 1: GENERAL DESCRIPTION
1.1 General Description – CopyDisc Platinum Series
The Verity Systems CopyDisc duplicator series provide reliable, unattended duplication of CD-R
and DVD±R discs.
The range of CopyDisc models are similar in operation but offer a difference in throughput. Each
model uses a pick and place mechanism to transfer discs from the Input spindle to the drives and
then subsequently remove the discs from the drives and place them on the Output spindle.
Two different types of picker mechanism are available: the Vacuum picker and the Mechanical
picker. With some CopyDisc models you can elect to have either of the pickers fitted, other models
are only available with one particular picker.
NOTE:
CopyDisc duplicators fitted with any thermal printer will only work with the vacuum picker.
The CopyDisc 4 and the CopyDisc 8 house up to 4 and 8 drives respectively and use a single fixed
Input spindle and similar Output spindle. CopyDisc XC units have a disc capacity of 660 discs, and
use two fixed spindles/baskets located on either side of the loader arm.
Integrated inkjet and thermal printers are available with some CopyDisc models, offering the
complete CD and DVD desktop publishing systems.
Throughout this manual reference is made to CD-Rs. The procedure for DVD±Rs is identical
except where stated.
1.2 General Description – CopyDisc XC Systems (660 Capacity)
Not applicable to 220 disc capacity CopyDisc systems
The CopyDisc4 XC and the CopyDisc8 XC house up to 4 and 8 drives respectively and use 3 input
baskets/spindles and 1 output spindle.
Baskets/Spindles No.1, No.2 and No.3 are used as input
baskets/spindles in the first instance. Each input basket/spindle
holds 220 blank discs, giving a total capacity of 660 discs.
Spindle No.4 is the initial output spindle.
Figure 1