Specifications

CopyDisc Duplicator Series
47
Appendix I: CopyDisc Systems with Puma On-Disc Printer
This section will provide you with detailed information on how to set up and operate your CopyDisc
with Puma combined duplicator fitted with an OptiPrinter Pro inkjet printer.
Note:
Good quality, inkjet printable discs should be used with the Puma On-Disc Printer.
Note:
Your CopyDisc is fitted with a mechanical picker, which enables you to print right to the
centre of full-face printable, inkjet discs.
Box Contents
Carefully remove your CopyDisc duplicator and printer from their shipping cartons and verify that
all parts are present. If there are missing or damaged parts contact Verity Systems or an
authorised partner/reseller immediately to correct any miss-packed or missing parts.
You should find the following:
 Verity Systems CopyDisc duplicator (fitted with 4 DVD drives and printer plate)
 Puma On-Disc Inkjet Printer
 Power Cables x 2 (one for CopyDisc and one for Puma)
 Printer USB Cable (to attach printer to PC if required)
 Serial Connector Cable and Parallel Cable
 Input Basket and Output Spindle
 Black and Colour Ink cartridges
 Quick Start Guide and CD with user manual, printer drive and test image
 CD Label Designer software
 2 blank inkjet printable CD-Rs
 Warranty Card
 Networking software CDs – if applicable (DiscPilot Client/CD label Designer CD,
PublisherNET Server CD and Nero software CD)
Attaching your Printer and Duplicator
Your CopyDisc will come fitted with the Puma printer plate. When you remove the Puma from its
packaging, you will notice that the base of the printer has location holes, which directly mirror the
location pins situated on the printer plate (figure F1).