Specifications

CopyDisc Duplicator Series

Remove the TEAC P-55 from its packaging. You will notice that the base of the printer has 2

location holes, (figure H3), which directly mirror the location pins situated on the printer plate.

Carefully position the printer onto the printer plate (figure H4) ensuring that the location pins fit

snugly into the location holes on the base of printer itself.

Power On

Connect the parallel cable and the serial cable to the back of the CopyDisc unit and then to the

back of the printer (figure H5). Now connect the respective power cables to the printer and the

CopyDisc duplicator and connect to the mains.

Fix plate to CopyDisc with

4 screws and 4 washers

Fig. H4

Locator holes

Fig.H5

Fig. H1

Fix bracket to CopyDisc

with 6 screws

Fig. H2

Serial cable

Parallel cable

Power cables

Fig. H3