Specifications

CopyDisc Duplicator Series

from being installed, please relax this restriction in order to install the Perfect Image printer

driver, in the Driver Signing dialog on the Hardware Tab at Start/ Control Panel/

System. If the message is a "warning", press Yes to continue with the installation.)

19. If a message displays asking for the Windows NT CD-ROM, remove the driver disk and

insert the Microsoft Windows NT CD-ROM or the requested disk of the Microsoft Windows

distribution disks, then click OK.

20. Click on the Device Settings Tab to review or change any of the Printer Properties.

Typically the default values provide a good starting point. You can use the "What's This"

option, in the mouse drop down menu to learn more about the usage of each feature. Click

OK to close each dialog.

21. When you complete the installation you should re-boot your system, (If a prior version of

this printer driver was installed NT will continue to use the old version of the printer driver

but may display the new version number until the system is re-booted. We recommend that

you power down the computer rather than "Restarting" the system.)

Installing the Perfect Image® CD Designer (Graphics Software)

Note:

If you have a networked CopyDisc 4P, there is no need to install Perfect Image CD

Designer Graphics software. DiscPilot networking software includes it’s own, easy to use,

integrated disc label design program.

Perfect Image® design software is included with your CopyDisc duplicator and printer so that you

can print bright and vibrant graphics onto your CDs quickly and easily.

Insert the Perfect Image® disc into your PC’s CD-ROM and follow the on screen instructions.

Creating a Print File (PRN file) (Standalone)

A PRN file must be created and uploaded onto your CopyDisc duplicator and printer in order for it

to print onto your CDs. Open Perfect Image® and create your design (refer to the Perfect Image®

user guide booklet for full details on how to create images and text). Once you are happy with your

design you are ready to create a PRN file.

Select File and Print from the Perfect Image® menu. Select the Rimage Perfect Image Printer

from the drop down printer list. Under the Options tab, click the Print To File check box (figure

G7).