Specifications

CopyDisc Duplicator Series
18
> key and you are prompted to confirm renaming by selecting either Yes or No with
the > cursor. Select Yes and press the > key. You are now prompted to enter the
new name.
Since there are no letters on the keyboard text must be entered with the arrow keys.
When text needs to be entered all available character positions are displayed
between square brackets as follows:
[ _ _ _ _ _ _ _ _ _ _ _ _ _]
If the initial text is not defined all blanks will be displayed. Otherwise the starting text
will be displayed. Press the left /\ or right \/ arrow to move the cursor the desired
character location.
CD Image Name
CD Image names are 8 characters long. Available characters are A-Z, 0-9
and space (blank).
Numbers
Numbers (quantities) are 4 digits long. Available digits are 0-9.
Once finished, pressing START accepts the name.
3.4.6 Erase Discs
The function allows you to erase data from re-writable media.
3.4.6.1 Type
Choose whether to have a FULL erase (this is the default setting) or a
QUICK erase.
3.4.6.2 Qty
Select the number of discs to erase.
Once finished, pressing START begins the erasure.
3.4.7 Compare Disc
Comparing CD-R's allows a copy to be compared against a master image, to make
sure there are no detectable differences. This feature is not available for Audio or
Video tracks, because Audio/Video tracks do not have ECC (error correction codes)
to guarantee data integrity.
Follow the Copying CD-R section 2.4 above, but instead of placing blank CD-R's on
the input spindle, put the CDs to be verified.
3.4.7.1 IMG:
Select the image on the hard drive you which to compare
3.4.7.2 Qty
Select the number of discs you wish to compare.