Troubleshooting guide

77
Status Codes and Messages
4
This chapter lists all the status codes and messages provided by NetBackup. There are two
parts to the chapter:
◆ The first section, Status Codes, lists the status codes in numerical order and includes
an explanation of what occurred along with a recommended action.
◆ The second section, Messages, lists the same status codes but sorts them
alphabetically according to the message associated with them. Only the messages and
status codes are included the second section.
If you see a status code without its associated message text, you can determine the
message, its explanation and recommended action by using the bperror command:
/usr/openv/netbackup/bin/admincmd/bperror -statuscode statuscode
[-recommendation]
where statuscode is the number of the message.
Example:
/usr/openv/netbackup/bin/admincmd/bperror -statuscode 150
termination requested by administrator
The process is terminating (or has terminated) as a direct result of a
request from an authorized user or process.
Status Codes
Note The term media server, as distinct from master server or server, does not apply to the
NetBackup BusinesServer product. When troubleshooting a BusinesServer
installation, please ignore any references to media server.
Status Code: 0
Message: the requested operation was successfully completed
Explanation: There were no problems detected with the requested operation.