Troubleshooting guide

Chapter 2, Troubleshooting Procedures 57

Using the Configure - NetBackup Window

Note Available only in the NetBackup Administration interface for Windows NT/2000.

The Configure - NetBackup window in the NetBackup Administration interface on

Windows NT/2000 provides access to many configuration settings for NetBackup clients

and servers. For example, you can modify the server list, e-mail notification settings, and

various timeout values for servers and clients. The following are general instructions for

using this window. For more information, see the online help or the NetBackup System

Administrator’s Guide - Windows NT/2000.

1. Start the NetBackup Administration interface on a Windows NT/2000 server or an

administration client.

2. Click Configure NetBackup on the Start menu.

3. Select the servers or clients where you want to make the change.

4. Click the Properties command on the File menu.

5. In the properties dialog box that appears, select the appropriate tab and make your

change.

Many procedures in this guide also refer to the NetBackup Configuration dialog box in

the Backup, Archive, and Restore interface on Microsoft Windows clients. This dialog box

lets you change NetBackup configuration settings only for the local system where you are

running the interface program. Most settings in the NetBackup Configuration dialog box

are also available in the Configure - NetBackup window.