Troubleshooting guide

Robotic Tests on UNIX
276 NetBackup Troubleshooting Guide - UNIX
ODL
/usr/openv/volmgr/bin/odltest -r roboticpath
TL4
/usr/openv/volmgr/bin/tl4test -r roboticpath
TL8
/usr/openv/volmgr/bin/tl8test -r roboticpath
TLD
/usr/openv/volmgr/bin/tldtest -r roboticpath
TLH
/usr/openv/volmgr/bin/tlhtest -r robotic_library_path
TLM
/usr/openv/volmgr/bin/tlmtest -r DAS_Hostname
TS8
/usr/openv/volmgr/bin/ts8test -r roboticpath
TSD
/usr/openv/volmgr/bin/tsdtest -r roboticpath
TSH
/usr/openv/volmgr/bin/tshtest -r roboticpath
Note For more information on ACS, TLH, LMF, and TLM robotic control, see the
appendixes in the Media Manager System Administrator’s Guide - UNIX.
For more information on RSM robotic control, refer to the Robot Drive appendix in the
Media Manager System Administrator’s Guide - Windows NT/2000.
In the above commands, roboticpath is the full path to the device file for the robotic
control (SCSI). Refer to the Media Manager Device Configuration Guide and review the
chapter for your platform to find the appropriate value for roboticpath.
There is also an optional parameter that specifies the device file path for the drive(s) so
that SCSI unloading of the drive(s) can be done with this utility.