Troubleshooting guide

Status Codes
152 NetBackup Troubleshooting Guide - UNIX
Explanation: A verify, duplicate, or import was attempted and failed for all selected
images.
Recommended Action: Check the NetBackup Problems report for the cause of the error.
To obtain detailed troubleshooting information, create an admin activity log directory and
retry the operation. Check the resulting activity log.
Status Code: 194
Message: the maximum number of jobs per client is set to 0
Explanation: The NetBackup Maximum jobs per client global attribute is currently set to 0.
Setting the value to 0 disables backups and archives.
Recommended Action: To enable backups and archives, change the Maximum jobs per
client value to the desired nonzero setting. This attribute is on the Global NetBackup
Attributes tab in the Master Server Properties dialog box. See “Using the Configure -
NetBackup Window” on page 57.
Status Code: 195
Message: client backup was not attempted
Explanation: A backup job was in the NetBackup scheduler’s worklist but was not
attempted.
Recommended Action:
1. Retry the backup either immediately with a manual backup or allow the normal
scheduler retries.
2. For additional information, check the All Log Entries report. For detailed
troubleshooting information, create a bpsched activity log directory on the master
server. After the next backup attempt, check the activity log.
Some actions to perform are:
◆ Verify that the vmd and ltid daemons (UNIX) or the NetBackup Volume
Manager and NetBackup Device Manager services (Windows NT/2000) are
running.
◆ Look for a problem in an earlier backup that made the media or storage unit
unavailable.
Status Code: 196
Message: client backup was not attempted because backup window closed