Troubleshooting guide

Status Codes
138 NetBackup Troubleshooting Guide - UNIX
3. If the problem persists longer than ten minutes, it is possible that it will be necessary
to reboot the server.
Status Code: 147
Message: required or specified copy was not found
Explanation: The requested copy number of a backup or archive image cannot be found.
Recommended Action: Correct the request to specify a copy number that does exist.
Status Code: 148
Message: daemon fork failed
Explanation: A NetBackup service could not create a child process due to an error
received from the system. This is probably an intermittent error based on the availability
of resources on the system.
Recommended Action:
1. Restart the service at a later time and investigate system problems that limit the
number of processes.
2. Check the Event Viewer Application and System logs (Windows NT/2000).
Status Code: 150
Message: termination requested by administrator
Explanation: The process is terminating (or has terminated) as a direct result of a request
from an authorized user or process.
Recommended Action: None.
Status Code: 151
Message: Backup Exec operation failed
Explanation: The Global Data Manager console has reported that a Backup Exec job
(backup, archive, or restore) did not complete normally.
Recommended Action: Consult the Backup Exec job history on the Backup Exec server
for details.
Status Code: 152
Message: required value not set