Troubleshooting guide

Chapter 4, Status Codes and Messages 133
Status Codes
Status Code: 124
Message: NB database backup failed, a path was not found or is inaccessible
Explanation: One or more of the paths specified in the catalog backup configuration could
not be backed up.
Recommended Action:
1. Check the NetBackup Problems report for additional information about the error.
Some possible causes are:
◆ The path does not exist.
◆ On a UNIX system, there is a symbolic link in one of the paths.
2. After determining which path could not be accessed, correct the path names in the
catalog backup configuration.
Status Code: 125
Message: another NB database backup is already in progress
Explanation: Only one NetBackup catalog backup may be active at any given time.
Recommended Action: None.
Status Code: 126
Message: NB database backup header is too large, too many paths specified
Explanation: Too many paths were specified in the NetBackup catalog backup
configuration to fit in a fixed-size media header. This error should not occur under normal
circumstances.
Recommended Action: Delete some of the paths from the catalog backup configuration.
Status Code: 127
Message: specified media or path does not have a valid NB database backup header
Explanation: The bprecover command was issued and the media ID specified does not
have valid catalog backup data.
Recommended Action: Validate that the correct media ID is being used.
Status Code: 130
Message: system error occurred