Owner manual

Model Hot Tap • Threaded Pipe Connections and Components
V200S Single Rod, Insert/Retract, General Purpose
(05 Class 600#, 10 and 15 Class 150#)
V200D Double Rod, Insert/Retract, Higher Pressures (600# max.) (10 and 15 only)
Pipe Size and Schedule or Exact ID and Wall Thickness
Code Sensor Pipe Size Range
05 2” to 6” (50mm to 150mm)
10 6” to 42” (150mm to 1050mm)
15 12” to 60” (300mm to 1500mm)
Code Pipe Orientation
H Horizontal
V Vertical
Instrument Connections
(Select Remote or Direct Mount)
(Transmitter sold separately)
Remote Mount Transmitter Direct Mount Transmitter
(1/2” NPT) (Flanged 450°F/232°C Max.)†
Parallel Regular RTD
*
Valve Transmount Mass Transmount
*
Manifold
PR D T F G E M
Mounting Assembly — Select Valve Type & Material
(Includes valve, close nipple & weld coupling)
Sensor (Valve Size NPT)
05 (3/4”) 10 (1-1/4”) 15 (2”) Type, Material & Rating
Code
B3B B5B B8B
Ball, Brz., 600 psig @ 100°F,
100 psig @ 400°F (max.)
B3C B5C B8C
Ball, CS, 1000 psig @ 100°F,
100 psig @ 400°F (max.)
B3S B5S B8S
Ball, SS, 1000 psig @ 100°F,
100 psig @ 400°F (max.)
G3C G5C G8C Gate, CS, ANSI Class 600#
G3S G5S G8S Gate, SS, 1200 psig @ 100°F,
660 psig @ 800°F
Code Options
SYN
Synchronized Two Rod Drive System
(Available for V200D-10 and V200D-15 sensors only)
SS Wetted Components
WPS
(Furnished with SS weld coupling, close & access nipple).
Must be ordered with SS access valve.
V200D 8”sch40 10 H R C2NC B5C SYN Typical Model Number
Ordering Information
Instrument Valves (Opt.) Manifolds (Optional)
Remote Mount Direct Mount
Needle Gate 3-Valve 5-Valve
C2NC (CS) C2GC (CS) F3SC (CS) F3HC (CS) F5SC (CS) F5HC (CS)
C2NS (SS) C2GS (SS) F3SS (SS) F3HS (SS) F5SS (SS) F5HS (SS)
1/2” NPT Soft Seat Hard Seat Soft Seat Hard Seat1/2” NPT
Explsn. Proof
Remote
RTD
Integral
RTD
Integral
Integral
Optional
*
For high pressure (>500psig) or high temperature (>500°F), remote mount RTD in a thermowell is preferred.
† Assuming adequate heat dissipation for transmitter.