Install Instructions

Z205467-0F Page 2 of 2 ©2019 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [e-mail] 0319
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
TD/TF/TG Series Installation Guide
TM
Dimensions
TD Model
0.25"Dia.
(6 mm)
1.5"
(38 mm)
2"
(51 mm)
1.1"
(28 mm)
L
TF Model
Available in 4”, 6”,
12” and 18”
probe lengths
4.20”
(106.68 mm)
1.78”
(45.18mm)
3.88”
(98.60 mm)
TG Model
L
0.25"Dia.
(6.3 mm)
2.9"
(74 mm)
4.6"
(117 mm)
2.0"
(51 mm)
0.7"
(18 mm)
Foam Gasket
2.5" x 2.5"
(64 mm x 64 mm)
1. Drill a 3/8” diameter hole into a duct for the sensor probe.
2. Insert the probe into the duct.
3. Secure the junction box housing (TF/TG) or the mounting ange (TD) to the outer surface of the duct using the self-tapping
screws provided.
4. Wire as shown.
Thermistor
RTD
Installation